Publicidad
Idiomas disponibles
Idiomas disponibles
USER'S MANUAL. PROLINK-4
[24]
SEARCH
This is the function for automatic station search. Starting at the present
frequency or channel, it searches until finds a station with an adequate level.
The threshold level (search level) can be defined by means of the TV mode
functions menu between 30 and 99 dBµV.
Key number 4 to enter numeric data.
[25]
STORE/RECALL
This key enables the measurement configuration to be stored/recalled. Each
configuration has the following information: name assigned to memory, memory
number, Channel or frequency (Freq), TV system (TV Sys), measurement
mode (Meas), external units power supply (V Lnb), measurement units (Units)
and Sound. The memory can store up to 99 measurement configurations
(numbered from 1 to 99).
Key number 5 to enter numeric data.
[26]
SOUND
This selects the type of sound. The options available in each case depend on
the band and the standard selected (see section 4.11 Selecting the Sound
Mode).
Key number 6 to enter numeric data.
[27]
EXTERNAL UNITS POWER SUPPLY
Enables selecting the power supply to the external units. Available voltages are:
External, 13 V, 15 V, 18 V and 24 V for the terrestrial band and External, 13 V,
15 V, 18 V, 13 V + 22 kHz, 15 V + 22 kHz and 18 V + 22 kHz for the satellite
band.
Key number 7 to enter numeric data.
[28]
DIRECT ACCESS KEY
Direct access key which can be assigned to any function on any menu.
Key number 8 to enter numeric data.
[29]
DIRECT ACCESS KEY
Direct access key which can be assigned to any function on any menu.
Key number 9 to enter numeric data.
02/2003
Page 23
Publicidad
