Promax PROLINK-4 Manual De Instrucciones página 193

USER'S MANUAL. PROLINK-4
Character
Non-destined
Switch
Positioner
4.9.4.20 Beep
This function allows the user to switch the audible indicator ON and OFF. To do this,
first select the TV mode functions menu, then choose the Beep function using the rotary
selector [4] and press. The monitor will show the BEEP screen and by turning the rotary
selector it will be possible to select between Beep ON or Beep OFF. To validate press it again.
4.9.4.21 Equipment Information
This function displays information on the instrument. To activate it, press the
rotary selector [4] while in the TV operation mode. Turn the rotary selector [4] to the
Equipment Info. function and press. The monitor will show the EQUIPMENT INFO.
screen listing several informations such as the instrument serial number (Serial
Number), the version of the control program (Version), etc.
To exit the function press the rotary selector [4].
02/2003
Command
Switch 1
Switch 2
Switch 3
Switch 4
Halt
Disable limits
Enable limits
Limit East
Limit West
Drive E. seconds
Drive E. steps
Drive W. seconds
Drive W. steps
Store position
Goto position
Table 5.- DiSEqC commands.
Associated parameter
A/B
A/B
A/B
A/B
---
---
---
---
1 to 127
1 to 128
1 to 127
1 to 128
1 to 255
1 to 255
Page 75