Sound Adjustments; Adjusting The Sound; General Settings - Psm - JVC KD-G120R Manual De Instrucciones

Sound adjustments

You can select a preset sound mode suitable to
the music genre (C-EQ: custom equalizer).
Preset values
Indication (For)
USER (Flat sound)
ROCK
(Rock or disco music)
CLASSIC
(Classical music)
POPS (Light music)
HIP HOP
(Funk or rap music)
JAZZ (Jazz music)

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
* Displayed only when "L/O MODE" is set to
"WOOFER" (see page 10).
Indication, [Range]
BAS* 2 (bass), [–06 to +06]
Adjust the bass.
TRE* 2 (treble), [–06 to +06]
Adjust the treble.
FAD* (fader), [R06 to F06]
3
Adjust the front and rear speaker balance.
BAL* (balance), [L06 to R06]
4
Adjust the left and right speaker balance.
BAS TRE S.BS
(bass) (treble) (super bass)
00 00 OFF
+03 +01 ON
+01 –02 OFF
+04 +01 OFF
+02 00 ON
+02 +03 OFF
Indication, [Range]
S.BS* 2 (super bass), [S.BS ON or S.BS OFF]
[01 to 05]*
Maintain the richness and fullness of the bass
sound regardless of how low you set the volume.
SUB. W (subwoofer), [00 to 08]
Adjust the subwoofer output level when a
subwoofer is connected.
VOL (volume), [00 to 30 or 50*
Adjust the volume.
2
* When you adjust the bass, treble, or
super bass the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including "USER."
3
* If you are using a two-speaker system, set the
fader level to "00."
* 4 This adjustment cannot affect the subwoofer
output.
5
* Range adjustment for super bass is adjustable
only when it is set to "S.BS ON."
6
* Depending on the amplifier gain control
setting. (See page 10 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode)
items listed in the table on page 10.
1
2
Select a PSM item.
3
Adjust the PSM item selected.
4
Repeat steps and
2
PSM items if necessary. Then press
SEL to finish the procedure.
5
6 ]
to adjust other
3
To be continued...
9