ADJUST
THE OVEN THERMOSTAT
DO IT YOURSELF!
You may find that your new oven cooks differently
than the one it replaced.
We recommend
that you
use your new oven for a few weeks to become more
familiar with it, following
the times given in your
recipes as a guide.
If you think your new oven is too hot or too cold,
you can adjust the thermostat
yourself.
If you think
it is too hot, adjust the thermostat
to make it cooler.
If you think it is too cool, adjust the thermostat
to
make it hotter.
We do not recommend
the use of inexpensive
thermometers,
such as those found in grocery stores,
to check the temperature
setting of your new oven.
These thermometers
may vary 20-40
degrees.
To Adjust the Thermostat:
1. Pull the OVEN
TEMP
knob off the shaft,
look at the back of the
knob and note the
current setting before
making
any
adjustment.
The knob
is factory set with the
top screw directly under
the pointer.
Back of the OVEN TEMP knob.
Bottom screw moves toward
HOTTER or COOLER
2. Loosen both screws on back of the knob.
3. Hold the knob as shown in the illustraion
of the back
of the OVEN TEMP knob and turn so the bottom
screw moves in the desired direction. You will hear
and feel notches as you turn the knob. Each notch
changes the temperature
about 10° Fahrenheit.
The bottom
screw
moves toward HOTTER
to increase
the temperature.
The bottom
screw
moves toward COOLER
to decrease the temperature.
4. Tighten the screws.
5. Return the knob to the range.
Re-check oven performance
before making any
additional adjustments.
17