Aventics DDL Instrucciones De Servicio página 103

1
2
Fig. 11: Mounting input/output modules, example
1 Hexagonal socket-head screws
2 E end plate
3 Seal
4 Output module
AVENTICS | DDL | R499050020–BDL–001–AD
6
3
4
3
A maximum total of 3 input modules and 3 output modules
may be mounted on one valve system. Observe the
permissible current load.
See Fig. 11 on page 103.
1. Unscrew the E end plate (2) from the bus coupler (7) or from
the last input (5) or output module (4) of the valve system
(2 hexagonal head-socket screws DIN 912 – M4 (1), wrench
size 3) and remove from the tie rods (6).
Disassembly and Exchange
7
6
3
5
5 Input module
6 Tie rod
7 Bus coupler
103