Breguet 3880 Instrucciones De Uso página 11

3880
20/50...). Since the S30 hand com-
pletes one revolution in 30 seconds, first
check the minutes hand M60 on the
B60 scale to see if the seconds being
counted are between 0-30 (M60 hand
on the red section) or between 30-60
(M60 hand on the white section). Using
this information, read the seconds hand
S30 on the B30 scale (each large red
marker represents one second and each
small white marker represents 1/10th
second.)
Example A: 53 min 28 sec 3/10
Example B: 3 min 33 sec 8/10
Push-piece II: resetting the chrono-
graph to zero.
Pressing push-piece II resets the
chronograph hands to zero.
If this is done after the watch has been
stopped by pressing push-piece I, the
hands are reset to the starting position.
If it is done when the chronograph is
running, the hands return to the starting
position and, when push-piece II is
released, immediately begin another
timing (flyback function).
Note:
If the time is changed while the chrono-
graph is running, the timing operation
will be affected.
HF Time-zone time
S30 30 seconds indication
(B30 scale)
M60 60 minutes indication
(B60 scale)
H24 24-hour indication linked to the
reference time
HR Reference time
D Date indexed to the time-zone
time
PS Small seconds