Cleaning The Oven Door; Lift-Off Oven Door - GE PT920 Manual Del Propietário

Horno empotrado a conveccion electrico
Ocultar thumbs Ver también para PT920:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Careand cleaning.
Do not rub or clean the door gasket--
it has an extremely low resistance to
abrasion.
If you notice the gasket becoming worn,
frayed or damaged in any way or if it has
become displaced on the door, you should
have it replaced.
Cleaning the Oven Door
To cleanthe insideof thedoor:
Because die area inside die gasket
is cleaned during the self'clean cycle,
you do not need to clean this area
by band.
The area outside the gasket and
the door liner can be cleaned with a
soap4illed or plastic scoudng pad,
hot water and detergent. Rinse well
with a vinegar and water solution.
Toclean the outside of thedoor:
Use soap and water to tlloroughly
clean the top, sides and flont of the
oven door Rinse well. You m W a/so
use a glass cleaner to clean the glass
on die outside of the door Do not let
water drip into the vent openings.
If any stain on file door vent trim is
pe,_ismnt, use a soft abraske cleaner
and a sponge-scrubber
for best results.
Spillage of marinades, fhfit] uices,
tomato sauces and basting materials
containing acids m W cause
discoloration and should be wiped
up immediaml> When surface is cool,
clean and _{nse.
Do not use oven cleaners, cleaning
powders or harsh abrasives on the
outside of the do(m
Lift-Off Oven Door
Slot
Hinge 1 0cl<
Pull hinge locks down to unlock
Removal position
The door is very heavy. Be careful when
removing and lifting the door.
Donot lift thedoorbythehandle.
Toremovethedoor:
[_]
Fully open
the do(m
[_
Pull the hinge locks down toward
the door flame,
to the unlocked
position.
A tool, such as a small fiat-
blade
screw&iveL
m W be required.
[_
Firmly grasp both sides of the door
at the top.
Close door to die door removal
position
(see illusuafion).
[_
Lift door up and out undl the binge
arItl is clear of the slot.
Toreplacethedoor:
[_
Firmly grasp both sides of the door
at the top.
%
Hinge
arm
With the
Bottom_l III
Hin;e arm
door at the
edge _lll[_k
I/'i
same angle
as ofslot,
the removal
position,
seat the
indentation
of
the binge am1
Indentation
into the bottom
edge of the binge slot. The notch
in
the binge am1 must be flflly seated
into die bottom
of tlle slot.
Fully open
the door
If the door will
not fldly open,
tlle indentation
is
not seated correctly
in die bottom
edge of the slot.
Push the binge locks up against the
flont flame
of the oven cavity; to the
locked
position.
Hinc
loci<
Push hinge locks up to lock
[_
Close the oven door
40
Probe
The temperature
probe
may be cleaned
with soap and water or a soap-filled
scorning
pad. Cool the mmpemmre
probe
before
cleaning.
Scour stubborn
spots with a soap-filled
scouring
pad,
rinse and dry.
Donotimmerse the temperature p robe
in water
Donotstorethetemperature p robein
theoven.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pt960

Tabla de contenido