GE PT920 Manual Del Propietário página 43

GEApp/iances.com
Possible Causes What To Do
Oven wilinot work A fuse in your home may = Replace the fuse or reset the chcuk breaker:
be blown or the ckcuit
breaker tripped.
Oven controls improperly set. • See the Using the oven section.
Oven will not self-clean The oven temperature • Alk)w the oven to coo/and reset t]le controls.
is too high to set a
self-clean operation.
Oven controls improperly set. = See rile Using the self-cleaning oven secdon.
The probe is plugged into • Remove tile probe
flom
tile oven.
the outlet in the oven.
"Crackling" or This is the sound of the * This is normal.
"popping"
sound metal heating and coofing
during both the cooking and
cleaning functions.
Excessive smoking Excessive soil. * Touch tile CLEAR/OFF pad. Open tile windows to
during clean cycle rid tile room of smoke.
¼:;fit undl OVEN LOCKED goes
of{_ Wipe up tile excess soil and reset tile clean cycle.
Oven door will
Oven too hot. • Allow tile oven to cool below locking temperature.
not open after a
clean cycle
Oven not clean after a Oven controls not properly set. * See tile Using the self-cleaning oven sectkm.
clean cycle
Oven was heavily soiled. • (;lean lip heax'y spillovers before starting tile clean
cycle. Heavily soiled ovens m W need to selfXclean
again or ff_r a longer period of time.
"LOCKOOOR" The self-clean cycle has * Close tile oven doe*:
flashes in the display been selected but the
door is not closed.
"OVEN LOCKEO'is on The oven door is locked * Touch rile CLEAR/OFF pad. Allow tile oven to cool.
when you want to cook because the temperature
inside the oven has not
dropped below the
locking temperature.
Control keys activate
or £CO changes
screens when I
open the oven door
The control panel is dirty
or there is residue from
fiquid cleaners.
* Clean tile control panel with a vinegar and
water solution, and polish dry with a soft cloth.
See tile Care and cleaning secdon.
43