Publicidad
Idiomas disponibles
Idiomas disponibles
5. ASSEMBLING THE SIDE SHELF
Parts Required:
1
x
Side Shelf (#26)
3
x
Tool Hook (#D)
Installation:
•
Turn the Side Shelf upside down. On the edge of the Side Shelf with
three holes, install the tool hooks into each hole along the edge. The
tool hooks will secure to the nut that is pre-mounted on the inside.
6. MOUNTING THE SIDE SHELF BRACKETS
Parts Required:
1
x
Side Shelf Bracket / Left (#24)
1
x
Side Shelf Bracket / Right (#25)
4
x
Screw (#A)
4
x
Locking Washer (#C)
4
x
Washer (#B)
Installation:
•
Hand-tighten a Side Shelf Bracket with two screws, locking washers,
and washers to the right facing side of the Main Barrel.
•
Repeat for the other Side Shelf Bracket.
NOTE: Do not tighten screws completely until all screws have been
installed. Once all screws are installed, then tighten securely.
7. SECURING THE SIDE SHELF
Parts Required:
1
x
Side Shelf (#26)
2
x
Nut (#F)
2
x
Washer (#B)
2
x
Bushing (#G)
2
x
Screw (#E)
Installation:
•
Place Side Shelf onto the Side Shelf Brackets and from underneath
secure each side with a nut, washer, bushing, and screw. The screw
should be on the inside edge of the Support Bracket.
•
Repeat for the other side.
IMPORTANT: Avoid using the shelves to move or lift the grill. The
weight of the unit will cause the shelves to break, which is not
covered by warranty.
5
D
D
D
6
24
A C
B
25
7
E
F
B
G
E
26
A C
B
26
G
B
F
9
Publicidad
