Nilfisk SC370 43B Manual De Servicio página 57

Service Manual- SC370
Removal and Installation
Vacuum Motor (M2)
Removal
1. Push the machine to a level floor.
2. Ensure that the machine is off.
3. Ensure the recovery tank is empty.
4. Remove the recovery tank assembly.
5. Disconnect the battery connector connected to the machine.
6. Remove 4 screws (A) and the vacuum motor retention plate (B).
7. Remove foam (C) and shock absorber and grid (D).
8. Take out the vacuum motor (E) along with the foam (F).
9. Disconnect the electrical connections (G) of the vacuum motor.
10. Remove the vacuum motor (E), and if necessary replace parts (C), (D) and (F).
Installation
Assemble components in reverse order of disassembly.
A
F
E
C
D
B
40 Recovery System 56
G