ENGLISH
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
1.
Air fryer
2. Instruction manual
3. Baking tray
4. Air fryer basket
5. Baking basket
3. OPERATION
Place the air fryer on a flat, smooth, stable, and heat-resistant surface.
1.
Plug the power cord plug into the earthed power supply.
2. Carefully remove the baking tray, air fryer basket or baking basket.
3. Place the food in the baking tray, air fryer basket or baking basket as required.
4. Replace the baking tray, air fryer basket or baking basket as necessary.
Warning: do not touch the fryer immediately after cooking, otherwise you may burn yourself.
5. Choose the function you need from the control panel. You can set the time and
temperature manually.
6. Control panel operation:
-
The power icon will illuminate after the product is turned on. Press the power icon and
the system will enter the configuration state by default. Press the default programmes
icon on the digital display to make the programme choice and press the start/pause icon.
The programme you have chosen will be switched on and the others will be switched off.
-
The display shows the corresponding temperature and operating time by flashing. Press
the time/temperature icon and the display will flash showing the temperature. Press it
again and it will show the time. You can press the increase or decrease icons to set the
temperature and time. In case no operation is performed within 5 seconds, the current
status will be closed by default.
7.
Press start/pause, and the selected programme will start; press it again and the
programme will pause. The programme of your choice will be illuminated. You can press
44
CECOFRY FIREDOME 6000