Sportplus B31851 Manual De Instrucciones página 43

5. ASSEMBLY INSTRUCTIONS
STEP 3
14
18
15
14
14
16
1. Connect the plugs of the computer cable (9,10 and 17, 18) at the top to the main device (1)
and at the bottom to the handlebar post (4). See detailed image on the right.
2. Carefully slide the handlebar post into the main device. Fasten from the front with 2 sets
of bent washers
2 sets of bent washers (16) and hex screws (14). Fasten tightly.
3. Fasten the handlebar grips (5L, 5R) to the sides of the handlebar (4) 2 hex screws (14) on
each side. Fasten tightly.
4. Connect the plugs of the computer cable from the computer (6) to the correct plugs on
the computer (9, 10) from the upper part of the handlebar post (4).
5. Fasten the computer to the handlebar. Use 4 screws (12) (premounted to the back of the
computer (6)).
12
5L
4
10
9
17
14
16
1
(15) and hex screws (14). Fasten from the left and the right with a total of
6
14
14
5R
17
43
9
10
18