Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions SATA FDG
EN
1.4. Replacement, accessory and wear-and-tear parts
In principle, only original replacement, accessory and wear-and-tear parts
from SATA are to be used. Accessories that were not delivered by SATA
are not tested and not approved. SATA assumes no liability whatsoever
for damages incurred due to the use of unapproved replacement, acces-
sory and wear-and-tear parts.
1.5. Warranty and liability
The SATA General Conditions of Sale and Delivery and further contractual
agreements, if applicable, as well as the valid legislation at the time apply.
SATA is not liable in case of
■ When the operating instructions are disregarded.
■ When the product is used in other than the intended ways of usage.
■ When untrained staff is employed.
■ When no personal protection equipment is worn.
■ When no original accessories and spare parts are used.
■ When the product is manipulated, tampered with or technically modi-
fied.
■ Natural wear / and tear
■ In case when the product has been exposed to untypical shockloads
and impacts during usage.
■ Impermissible assembly and disassembly work
1.6. Applicable directives, regulations and standards
Directive 2014/34/EU
Equipment and protective systems intended for use
in potentially explosive atmospheres (ATEX)
Directive 2014/68/EU
Pressure Equipment Directive, module A1, internal production inspection
DIN EN 1127-1
Explosive atmospheres Part 1: Basic concepts and methodology
DIN EN ISO 80079-36
Non-electrical equipment for use in potentially explosive atmospheres –
Part 1: Basic concepts and requirements
DIN EN ISO 12100-1/-2
Safety of machinery, general requirements
DIN EN 1953
Atomising and spraying equipment for coating materials - Safety require-
36
Publicidad
