Publicidad
Idiomas disponibles
Idiomas disponibles
Assemble the Bucket-3
1
2
Battery
1. Fit the both ends of boom linkage into the slots in each boom.
2. Insert the Ø4x16 screw through the hole on the boom and into the boom
linkage, tighten the screw. Repeat for the other side.
4
3. Tighten a Ø10 lock nut to one end of the Ø12 rod.
4. Slide a Ø12 washer onto the Ø12 rod from other side.
22
The follow steps are only for TYPE A.
3
1. Insert the Ø12 rod through the hole on the boom (right).
2. Slide an inner bushing onto the Ø12 rod.
3. Align the holes on each side of vehicle body with the holes on boom (left).
Insert the Ø12 rod through the holes on vehicle body. Slide an inner bushing
onto the Ø12 rod, and continue pushing the Ø12 rod till it passes through
the hole on the boom (left).
4. Slide a Ø12 washer onto the Ø12 rod.
5. Tighten a Ø10 lock nut to the end of Ø12 rod with a spanner.
HINT: An extra spanner has been provided to hold the lock nut on the
other side of the Ø8 rod while tightening the lock nut on the other side.
to be continued...
Assemble the Bucket-4
Ø10 lock nut
Ø12 washer
Ø12 rod
Inner bushing
1
2
3
4
5
23
Publicidad
