Publicidad
Idiomas disponibles
Idiomas disponibles
88 of 449
5 Installation at Site
5.3.1.4 Preparing the pump set
Fastening the claw for twin guide rail arrangement
732.35
M16: 70 Nm
902.35
550.35
UG1803370
920.35
Fig. 9: Fastening the claw for twin guide rail arrangement
1. Fasten claw 732 with screws 914, nuts 920 and discs 550 to the discharge flange.
Tighten the screws to a torque of 70 Nm.
2. Fit profile seal 410 into the opening of claw 732.
This will seal the duckfoot bend/pump connection.
Attaching the lifting chain / lifting rope
Stationary wet installation
Fig. 10: Attaching the lifting chain / lifting rope for stationary wet installation
1.
Attach the lifting chain with shackle or the lifting rope to the pump set handle.
This attachment point achieves a forward inclination of the pump set towards
the discharge nozzle, which allows the pump claw to hook onto the duckfoot
bend.
Sanipump VX 65/80
Publicidad
