Descargar Imprimir esta página

Babify Onboard Swivel 360 Manual Del Usuario página 26

Ocultar thumbs Ver también para Onboard Swivel 360:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61
EN
26
INSTALLATION
WARNING:
Do not use forward facing before the child's height exceeds 75cm.
If the vehicle is equipped with an active front seat airbag. DO NOT use the
child seat in a rearward facing position.
1 Rearward Facing lnstallation
1.1 (40-105 cm, birth to approx. 15months) with 5-point harness+ ISOFIX +
top tether
1. Prepare the ISOFIX.
2. Ensure that the 5-point
harness is correctly installed
and ensure that the 5-point
harness is correctly adjusted.
3. Adjust the child car seat to
the fullest recline position
and make sure recline
mechanism is securely locked.
4. Rotate the child car seat. To the rear of the vehicle against the direction of
travel. Ensure that the child car seat is in the rearward facing position and
the rotation mechanism is securely locked.
5.
Double check to make sure that the child car seat is in the fullest reclined
position.
6. Install the ISOFIX confirm that the indicator turns green.
7. Push the child seat towards the backrest applying a firm, even pressure on
both sides.
8. Children between 40 and 75 cm need cushions to sit in seats, when it
exceeds 75 cm, take off the seat cushion.
1.2 Securing your child with 5-point harness
1. Press the red button to release the 5-point harness buckle and press on
the central adjuster to pull out the shoulder belts . DO NOT pull on the
shoulder pads.
2. Place your child in the child car seat, and ensure that your child's back is
lying flat against the backrest of the child car seat.
3. Guide the two buckle latches together and insert them into the 5-point
harness buckle . An audible "click" will be heard once the buckle is locked.
4. Pull the adjuster strap towards you until the harness lies flat and is close
against your child's body.

Publicidad

loading

Este manual también es adecuado para:

1004090310040904