Babify Onboard Swivel 360 Manual Del Usuario página 30

EN
30
3. Turn the metal plate to be vertical and remove from the housing, remove
the 5-point harness buckle.
2 Installation of the 5-point harness
1. Place the 5-point harness buckle into the crotch pad.
2. Turn the metal plate of the 5-point harness buckle obevertical and insert it
into the housing.
3. Guide the two buckle latches together and insert them into the 5-point
harness buckle. An audible "click"will be heard once the buckle is locked.
4. Pull the adjusting handle upwards, whilst pushing the headrest upwards
until holes align.
5. Thread both of the shoulder belts through
the shoulder pads.
6. Thread the loops of both shoulder belts
and shoulder pads through the headrest
slots. The straps of the shoulder pads
should be beneath the straps of shoulder
belt.
Turn the child car seat around so that the
rear is facing you.
1. Open the rear cover board.
2. Place the webbing loops of the shoulder
straps over the joint plate.
3. Close the rear cover board.