Descargar Imprimir esta página

Husqvarna 542i XP Manual Del Usuario página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

brake manually. This movement starts a spring-loaded
mechanism that stops the drive sprocket.
How the chain brake is engaged is in relation to the
force of the kickback and position of the product. If
you get an intense kickback while the kickback zone is
farthest away from you, the chain brake engages by the
inertia release. If the kickback is small or the kickback
zone is nearer you, the chain brake engages manually
by your left hand.
Use the chain brake as a parking brake when you
start the product and when you move short distances.
This decreases the risk that you or a person near you
touches the saw chain.
Pull the front hand guard rearward to disengage the
chain brake.
2022 - 003 - 07.09.2023
B
A
A kickback can be very sudden and intense. Most
kickbacks are small and do not always engage the chain
brake. If a kickback occurs when you use the product,
hold tightly around the handles and do not let go.
The front hand guard also decreases the risk to touch
the saw chain if your hand lets go of the front handle.
In the felling position you cannot engage the chain brake
manually. The chain brake can in this position only be
engaged by the inertia release mechanism.
Power trigger lockout
The power trigger lockout prevents accidental operation
of the power trigger. If you push the power trigger
lockout forward (A) and then push the power trigger
lockout against the handle (B), it releases the power
trigger (C). If you release the handle, the power trigger
11

Publicidad

loading

Este manual también es adecuado para:

542i xp g