CAMPAGNOLO SPEED 11 Manual Del Usuario página 39

5.2 - FRONT DERAILLEUR SETTINGS
If the front derailleur does not function
correctly as described, adjust the front
derailleur cable tension setting screw on
the frame cable, or adjust the Campagnolo
adjuster, which must be installed on cable
sheaths on frames with internally routed
cables.
If the chain is on the largest chainring
and rubs against the fork:
• if the chain is on the largest sprocket
(Fig. 5), and rubs against the inner side
of the fork, reduce the cable tension:
tighten the adjuster screw. In the case of a
Campagnolo adjuster, do not exceed the
lower notch as this will compromise the
operation of the adjuster itself (Fig. 6).
ENGLISH
5
6
39