MSG Equipment MS006 Manual De Usuario página 16

English
Test bench MS006
• Obstruct the movement of rotating parts of the stand.
7. To prevent the damage and the failure of the bench, do not make any modifications in the bench
in your discretion. Any modifications can be effected by the official manufacturer only. Should the
bench have defects contact the manufacturer or a dealer.
8. In case of failures in the operation of the bench, stop further operation and contact the
manufacturer or sales representative.
WARNING! The manufacturer is not responsible for any damage or injury to human health
resulting from non-compliance with the requirements of this user manual.
5.1. Safety guidelines
1. The test bench shall be operated by the workers qualified to work with certain types of
equipment and received appropriate training in the safe operation.
2. In case of a power outage, the test bench shutdown is mandatory when cleaning and lubricating
the bench and in emergencies.
4. To ensure electrical and fire safety PROHIBITED:
- connect the bench to the electrical network having faulty protection against current overloads
or not having such protection;
— use a socket without a grounding contact to connect the bench;
— use extension cords to connect the bench to the electrical network. If the socket is far from the
bench installation site, it is necessary to modify the electrical network and install the socket;
- operation of the bench in defective condition.
- Independently to repair and make changes to the design of the bench, because it can lead to
serious damage to the bench and deprive the right to warranty repair.
5. The units with a running drive must not be left unattended on the test bench.
6. While mounting and dismounting of a unit from the bench, to prevent arms from harming, be
more cautious.
7. The diagnosed alternator must be securely fastened.
5.2. Preparing the bench for operation
The test bench is delivered in the outer packaging. Once unpacked, make sure the test bench is
in good condition. If damage is found, contact the manufacture or sales representative before
turning on the equipment.
Install the equipment on a desktop. The bench has high-adjustable legs to compensate for the
surface irregularities.
When installing, provide a minimum space of 0.5m from the right side of the test bench for free
air circulation.
16