MSG Equipment MS006 Manual De Usuario página 20

English
Test bench MS006
6.2. The connection of the bench diagnostic outputs to
alternator
Assessment of the alternator operability requires a proper connection of the diagnostic outputs
of the test bench.
Alternator OEM which is commonly placed on the unit body or on the rear cover helps to find the
information on the alternator connector terminal identifications in the integral bench database
(fig. 19) or in the Internet.
Figure 19. Database Search Menu and search results
To search the information on alternator in the bench database, do as follows:
1. In the main menu (fig. 4) press SELECT ALTERNATOR BY NUMBER.
2. Enter alternator OEM in the displayed window and press SEARCH.
3. If the bench database finds the required alternator, its type, main technical characteristics,
photo and connection terminal identifications (to enable the display of the connection terminal
identifications press red arrow in the part of the photo). Use the present information and the
information from the Appendix 1 for the proper connection of the bench diagnostic outputs to the
alternator connector.
20