MSG Equipment MS006 Manual De Usuario página 19

English
User manual
- Check manually the tightness of the belt (based on personal experience).
Figure 17. Belt tightness check
- Connect the black power cable «B-» to the unit housing.
- Connect the red cable «B+» to the corresponding output of the alternator.
Figure 18. Connection of power cables to the alternator
- Connect the outputs of the alternator voltage regulator to the appropriate outputs of the test
bench (Fig.2, n.5).
The dismantling of alternator is made in the reverse sequence.
WARNING! The dismantling of alternator can be made only when the drive has completely
stopped, and the diagnostics mode is terminated.
19