Kärcher RCF 3 Manual Del Usuario página 20

Before you download the App, make sure you have the
following:
● The mobile device is connected to the Internet.
● The 2.4 GHz WLAN of the router is activated.
● Sufficient WLAN coverage is guaranteed.
Download the Kärcher Home Robots App from the Ap-
®
ple App Store or from Google Play™ store.
● Google Play™ and Android™ are trademarks or
registered trademarks of Google Inc.
®
● Apple and the App Store
tered trademarks of Apple Inc.
Connecting the cleaning robot with the Kärcher
Home Robots App and WLAN:
1. Download the KÄRCHER Home&Garden App from
the Apple App Store or from the Google Play Store.
2. Open the Kärcher Home Robots App.
3. Create an account (if you are not already regis-
tered).
4. Add the desired cleaning robot.
5. Follow the step-by-step instructions in the App.
Startup
Inserting the waste and fresh water tank
The waste water tank must first be inserted into the
fresh water tank before the entire tank module can be
installed in the cleaning robot.
1. Push the waste water tank horizontally into the fresh
water tank until it audibly latches into place.
Illustration F
2. Push the fresh water tank horizontally into the clean-
ing robot until it audibly latches into place.
Illustration G
Note
It is also possible to insert the fresh water tank into the
device first and then the waste water tank into the fresh
water tank.
Removing the waste and fresh water tank
1. Press the fresh water tank unlocking button and re-
move the fresh water tank from the device.
Illustration K
2. Press the waste water tank unlocking button and re-
move the waste water tank from the fresh water
tank.
Illustration L
Inserting the cleaning roller
1. Press the roller cassette unlocking button.
The roller cassette detaches from the cleaning ro-
bot.
2. Remove the roller cassette from the cleaning robot.
Illustration H
20
®
are trademarks or regis-
English
3. Fold up the Scraper unit.
4. Place the cleaning roller on the roller holder as
shown in the illustration and then press it down.
Note the colour encoding (grey to grey, white to
white).
Illustration I
5. Fold down the Scraper unit.
6. Pay attention to the cassette guide and push the
roller cassette into the cleaning robot until it audibly
engages.
Illustration J
Filling the fresh water tank
ATTENTION
Danger from escaping water
Risk of damage
Empty the waste water tank every time the fresh water
tank is empty and before filling the fresh water tank to
prevent the waste water tank from overflowing.
1. Remove the fresh water tank, see chapter Remov-
ing the waste and fresh water tank.
2. Open the tank cap and turn it to the side.
Illustration M
3. Fill the fresh water tank with cold or lukewarm fresh
water.
4. For an even better cleaning result, add KÄRCHER
detergent or care agent to the fresh water tank.
ATTENTION
Overdosing or underdosing of the detergent or care
agent
Can result in poor cleaning results.
Follow the dosage recommendations for the detergent
or care agent.
Note
Do not use detergents from other manufacturers, as this
may cause heavy foaming on the floor or in the waste
water tank of the device.
In addition, foam may form during the first cleaning runs
if there is still residue on the floor from previously used
detergents from other manufacturers.
5. Close the tank cap.
6. Insert the fresh water tank into the device, see chap-
ter Inserting the waste and fresh water tank.
Operation
ATTENTION
Danger due to obstacles
Risk of damage
Before operating the cleaning robot, make sure that
there are no obstacles on the floor, stairs or landings.
Preparing the environment
● Keep the floor free of objects lying around to ensure
efficient cleaning. Obstacles require time-consum-
ing cleaning because the cleaning robot has to drive
around objects.
● Open the doors of the rooms that are to be cleaned.
● When operating the cleaning robot with the app:
Carry out the configuration in the app so that the
cleaning robot can clean according to individual
cleaning requirements (no-go zones, different
cleaning parameters, etc.), see chapter Settings in
the app.