• battery charger display (fig. A / B, ref. 7) (OPTIONAL)
3.3.
Danger zones
A - Control panel: danger of short circuit.
B - Centre brush: danger due to brush rotation.
C -Side brush: danger due to brush rotation.
D -Back/front wheels: danger of crushing between the wheel and chassis.
E - Motor compartment: danger of short circuit between the poles of the battery
(BATTERY VERSION), risk of serious burns when performing any maintenance with
the engine off but not completely cold (INTERNAL COMBUSTION ENGINE
VERSION).
4.1.
Safety regulations
Read the "User manual" carefully before start-up and use, or before performing
maintenance or any other work on the machine.
Rigorously respect all instructions in the Manual (in particular those relating to
danger and important information) and on the safety plates fitted to the machine.
The Manufacturer declines all liability for damage to people or things resulting from
The appliance must be used exclusively by persons trained in its use and/or who have
demonstrated their ability and have been expressly instructed to use the appliance.
The machine must not be used by minors.
The machine must not be used for purposes other than those for which it was expressly
designed. Scrupulously respect all safety standards and conditions applicable to the type
of building in which the machine is to be operated (eg: pharmaceutical companies,
hospitals, chemicals, etc).
Do not use the machine in places with inadequate lighting or explosive atmospheres, on
public roads, in the presence of dirt hazardous to health (dust, gas, etc) and in unsuitable
environments.
The machine is designed for use at temperatures of between +4° C and +35° C. When the
machine is not being used, the temperature range is +0° C and +50° C.
The machine is designed to work in a humidity of between 30% and 95%.
Never pick up flammable liquids or explosives (eg. petrol, fuel oil, etc), acids and solvents
4.
SAFETY INFORMATION
IMPORTANT
failure to observe the instructions.
ENGLISH
6