Descargar Imprimir esta página

Telefunken T 104 Instrucciones De Manejo página 20

Publicidad

Idiomas disponibles

Idiomas disponibles

Take
off knob of counter. Underneath you will find a screw wh ich secures a white ring.
Loosen screw with the help of a screw driver (vide photograph)
and turn ring until the red
colour marking shows to the desired number of calls on the dial. Refasten screw and slightly
press knob on its holder.
The counter has a storing capacity of up to 100 calls adjustable in a rhythm of 5 stages. Please
make sure that the recorder is always equipped with sufficient recording tape.
For starting your telephone answering device please press 'release button' @ whereby you adjust
the counter @ to the preset handling capacity of incoming calls. Each call is now counted and
the dial of the counter informs you at the same time, how many calls you may still record on
your tape. In position 'zero' th3 recording capacity of your tape is exhausted
and further calls
are no Ionger accepted
by the telephone
answering
machine. In this case the caller only hears
the asual call sign.
Operating the telephone with answering
device switched on
Also with the answering
device in stand-by
position, you may, as usual, dial your business
friends, answer Incoming calls or take part in a current call. In the latter case the T 104 will stop
its recording, and you can speak to the caller as long as you desire.
The answering device will stop recording from the moment you lift up the receiver. In case the
answering device has already started transmitting
its message, it will continue the present turn;
the voice can however no Ionger be heard neither in your nor the caller's phone.
The combillation
answering device/tape
recorder makes it possible to listen into a present re-
cording by monitoring through headphones
(Teleset) to be connected
to the appropriate socket
on the tape recorder.
Switching off
During your presence
you can switch off the answering
device simply by slightly depressing
button @. Button @ springs out. In case button @ has been pressed too far, the tape will on ce
more make one complete revolution
(red pilot lamp lights up). After the end of this revolution
the machine switches off. All three buttons have to be on the same level. The green pilot light
disappears;
the set is switched off and can at any time be switched on again by simply repressing
button @.
21

Publicidad

loading