Urmet K-Steel 1038/16 Manual Del Usuario página 33

ERROR MESSAGES
Various types of error messages may appear on the
display.
NORMAL OPERATION ERRORS
Call to non existent user:
NON-EXIST.
Call from secondary calling module to user in another
riser:
One or more keys jammed:
KEYBOARD
Wrong or disabled door opener code:
LOCK REL.
NON-EXIST.
INSTALLATION/PROGRAMMING ERRORS
No data line signal (terminal "D" not connected or no
signal):
DATA LINE
Wrong password:
PASSWORD
Attempt to enter a name which already exists in the
directory:
NAME PRESENT
Attempt to enter a name but the memory is full:
MEMORY FULL
DS1038-011B
ERROR
ERROR
COLUMN
LOCKED
ERROR
INCORR.
ERROR
ERROR
Attempt to edit or delete a name but the memory
is empty:
MEMORY EMPTY
SELF TEST
No configuration memory:
EEPROM MISSING
Faulty configuration memory:
Faulty name memory:
TROUBLESHOOTING AND REPAIRING
DISPLAY
In the event of display problems, firstly check the
contrast setting by means of the trimmer (11).
An additional test can be accessed from the main
menu. Enter the configuration password or press
the rear button:
<LANGUAGE><CONF>
<ID><TEST><ESC>
Select <TEST> and press the
following test should appear:
Press each key. The corresponding character
should appear. Press the
the previous menu and select <ESC> to return to
normal operation.
ERROR
ERROR
ERROR
EEPROM
ERROR
FLASH
button. The
button to go back to
33