Publicidad
Idiomas disponibles
Idiomas disponibles
All information included in this manual is relevant to your own safety and that of your environment. If you have any
questions about the information included in this manual, consult a professional or contact the Authorised Service Centre.
The following information on hazards and precautions includes the most probable situations that may arise during
the use of this machine.
Check all the documentation, packaging and product labels before using it. If you encounter a situation not described in
this manual use common sense to use the machine as safely as possible and, if you see any danger, do not use the machine.
USERS
•
This machine has been designed to be manipulated by users of legal age who have read and understood these
instructions. Do not allow people under age and people who do not understand these instructions to use the
machine.
•
Familiarise yourself with this machine before using it. Make sure you know where all the controls are, the security
devices and how they should be used.
•
If you are an inexperienced user, it is highly recommend that you practice doing simple jobs and, if possible, in
the company of an experienced person.
PERSONAL SAFETY
•
Be alert, watch what you are doing and use common sense when operating this machine. Never use the machine
with defective protections or without safety devices.
•
Do not modify the controls of this machine.
•
Do not use this machine if any of its components are damaged.
•
Check that all safety features are installed and in good condition.
•
Do not force this machine. Use this machine for the correct application. Using the right machine for the right type
of work will allow you to work better and safer.
•
Avoid inhalation of exhaust gases. This machine produces dangerous gases such as carbon monoxide that can
cause dizziness, fainting or death.
•
Do not use this machine when you are tired or under the influence of drugs, alcohol, or medication.
•
Remove all keys or hand tools from the work area before starting this machine. A nearby key or tool may be
touched by a moving machine part and projected causing personal injury.
•
Before starting work on the machine, check that the burs are not in contact with any objects and that they can
move freely.
•
Keep your feet firmly on the ground and keep your balance at all times. Do not use this machine on slopes higher
than 15°. Be aware when working or moving with the machine on slopes. Be especially careful when changing
direction on a slope.
•
Hold the machine with both hands on the handlebars and always place your body behind it.
•
Keep all body parts away from cutting elements and moving parts when the machine is running. Before starting
it up, make sure that the cutting element is not in contact with any objects.
•
If the machine vibrates abnormally, stop the engine, inspect the machine for the possible cause and repair it. If
you cannot find the reason, please contact the Official Technical Service.
•
Do not touch the machine exhaust with the engine running or just after it has stopped. The exhaust from this
machine reaches high temperatures during engine operation and remains warm for a few minutes after the
engine stops.
•
Do not leave this machine unattended during operation. If you have to leave the machine unattended turn off
the engine, wait for the cutting tool to stop and unplug the spark plug wire.
•
Remember that the machine operator is responsible for hazards and accidents caused to other people or things.
The manufacturer is in no way liable for damage caused by improper or incorrect use of this machine.
63
EN
Publicidad
