Publicidad
Idiomas disponibles
Idiomas disponibles
78
MAINTENANCE
ATTENTION: When you have to carry out repairs or maintenance work use only original spare parts
to ensure maximum reliability of the machine.
ENGINE
Follow the rules indicated in the user manual.
RUNNING-IN (50 HOURS)
During the first 50 hours of operation of the machine do not do an
excessively hard work and follow the recommendations in the following
paragraph.
OILING THE AIR FILTER
Every 8 hours of work. Check the oil level and, if necessary, top up with
the same engine oil. Clean the filter element as indicated in the Engine´s
Use and Maintenance book.
NOTE: The cleaning frequency of the air filter
depends on the environmental conditions in which
the machine has been used; and it is recommended
not to exceed 8 working hours.
TRANSFER AND TRANSMISSION BOX
After the first 50 hours of work (running-in). Change the oil (see figure
12). If the change of oil is done when the engine is hot, it facilitates the
flow of dirty oil.
1.
Remove the oil filler cap (1)
2.
Remove the drain plug (3) from the bottom of the box and empty
the oil, and then reinstall the plug (3).
MANTENIMIENTO
Belt tension
Change
Check level
Engine oil
Change
Air filter
Replace
Transmission
wheel
Replace
Wheel pressure
Shaft teeth
Half-shaft of
Lubricate
the wheel
EACH USE
Check
X
X
X
Check
X
Clean
Check
X
Check
X
Clean
X
EVERY
EVERY 3
MONTH OR
MONTHS
24H USE
OR 50H USE
X
X
X
X
EVERY 6
EVERY YEAR
MONTHS
OR 300H
OR 100H
USE
USE
X
X
X
Publicidad
