Publicidad
Idiomas disponibles
Idiomas disponibles
80
PROBLEM
The straps do not
work forward
Excess heat
accumulates in
the transmission
/ tine area during
ploughing
NOTE: If you are unable to resolve the problem, contact the Authorised Service Centre.
STORAGE
•
Store this tool in a safe, dry place with temperatures between 0º and 45ºC.
•
Wait for the machine to cool before storing.
•
To reduce the risk of fire, keep the engine, muffler and fuel tank clean by removing any residual material, oil and
grease.
•
Before storing the machine for a long period of time, ensure that the storage area is free of excessive moisture
and dust.
•
Store the machine out of the reach of children and where fuel vapor does not come into contact with flames or
sparks.
•
For long periods of storage, store the machine without fuel. The stored fuels must be stabilized with a stabilizer.
•
Remove the spark plug, pour SAE 30 oil into the spark plug hole. Pull the starter rope slowly to distribute the oil
over the entire area. Replace the spark plug.
•
Protect wheels and axles from rust.
DISPOSAL / RECYCLING
Worn products are potentially recyclable and should not be disposed of in the usual bin. Help us protect the
environment and preserve natural resources.
Dispose of the appliance in an environmentally friendly way. Do not throw it away with the household rubbish. Its plastic
and metal components can be separated and recycled. Take this device to an approved recycling centre (green point).
Gasoline, used oils, oil / gasoline mixtures as well as objects stained with gasoline (e.g.: rags) should not be disposed
of in the usual trash, drainage, land, rivers, lake or sea. Objects stained with oil should be disposed of in accordance
with local regulations: take them to the most appropriate recycling centre.
The materials used in the packaging of the machine are recyclable: please throw them in the appropriate container.
•
Adjust the belt tension pulleys
•
Turn off the engine and let it cool down
•
Disconnect the spark plug wire
•
Pull down the safety control levers
•
Replace the spark plug strap and cable
•
Remove vegetation as instructed
•
FOLLOW ALL SAFETY INSTRUCTIONS
•
Check transmission fluid and refill if necessary.
SOLUTION
Publicidad
