Publicidad
Idiomas disponibles
Idiomas disponibles
4. While holding the Base with one hand,
push button on Belt Tensioner Handle
without using your thumb and pull open.
5. Route the vehicle Lap Belt through Belt
Path Opening, under SafeLock along
Belt Path, and through other Belt Path
Opening. BUCKLE THE BELT. Make
sure the Lap Belt lays flat and is not
twisted.
The vehicle belt should ALWAYS be
routed UNDER the SafeLock Belt
Tensioner. NEVER place a vehicle belt
over the SafeLock Belt Tensioner, even
in a vehicle with longer Buckle Stalks.
NOTE: Make sure that vehicle belt
buckle and hardware do not interfere
with correct installation of the Base or
with the connection of the Infant Car
Seat to the Base.
40
Installing and Removing the Infant Car Seat
Installing with Base Using Lap Belt Only
r r
t
t
Publicidad
