Publicidad
Idiomas disponibles
Idiomas disponibles
14.5
Electrical connection
Dangerous electrical voltage!
The machine may only be connected to the mains supply and the associated
checks carried out by a qualified electrician or under the instruction and
supervision of a qualified electrician!
•
Check, whether the neutral connection (if existing) and the protective grounding
function properly.
•
Check, whether the supply voltage and the frequency correspond to the specifications of
the machine.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
14. Assembly saw blade guard
Fix the saw blade guard (1) to the riving knife (3)
with the locking screw (2).
NOTE:
The saw blade guard should be positioned
as close as possible to the workpiece.
15. Assembly suction hose
• Attach the 32 mm suction hose (1) to the saw
blade guard (3) with a hose clamp (2), then
hook the suction hose into the holder.
NOTE:
Ensure that the suction hose is not kinked
and that there is sufficient distance between the
suction hose and the work area.
• Fasten the other end of the 32 mm suction
hose (1) with a hose clamp (2) to the suction
socket (3).
• One end of the 100 mm suction hose is
attached to the suction socket (4) with a hose
clamp (not included in the delivery content).
• The other end of the suction hose is
connected to a dust collection system (not
included in delivery).
WAR N I N G
ASSEMBLY
52
TS200 | TS250
Publicidad
