Makita RM350D Manual De Instrucciones página 19

4. Close the display cover.
Mowing starts. The LED blinks white during operation.
NOTE: The LED will blink for the time set in advance by the [LED]
setting.
NOTICE: When closing the display cover, press down firmly until it
clicks.
Specifying the date and time to start mowing
Specify the date and time to perform mowing from the following set-
ting item, and put the Robotic Mower into the stand-by state.
[Top menu] > [Main menu] > [Mowing preferences] > [Schedule]
For the detailed setting method, refer to the section "Start Mowing
Menu" (Page 20).
SETTING MENUS
Operate the three menu buttons and the keypad on the control panel to set the Robotic Mower in accordance with the application and purpose. This
chapter introduces the setting contents in the six menus and their multiple sub menus.
Top menu screen that appears after the power is turned on (except when starting up for the first time)
► Fig.18
Button Menu name
Start mowing
Park
Main menu
What can be set using the sub menus
Mow by automatic operation and charging.
Mow without automatic charging.
Start auto mowing at the desired timing. (Scheduled mowing is put on hold.)
Mow in a spiral pattern.
Return the Robotic Mower to the charging station.
Return the Robotic Mower to the charging station, and restart operation at the
scheduled time.
Return the Robotic Mower to the charging station, and restart operation at the
preset schedule.
Change and register the mowing area.
Mowing preferences Schedule mowing.
Determine the cutting height.
Set the guide signal active search period.
Cut the grass near the boundary.
Set the movement distance to the mowing start point.
Navigation preferences Select the departure method from the charging station.
Adjust the departure angles from the charging station.
Adjust the width of offset navigation.
Mow unmowed grass.
Set the alarm sounding time.
Change the PIN code.
Security
Prevent wire signal interference.
Protect the Robotic Mower from theft.
Save/load user preferences.
Change the date and time settings.
Change the display language.
Others Reset the user preferences.
Browse the product information.
Manage the LED on/off time.
Check the details of operation errors.
Stopping mowing
There are two methods for stopping mowing as follows.
Stop mowing and remain in place (Pause)
When the "STOP" button is pressed during operation, the display
cover opens and mowing will pause.
► Fig.16: 1. "STOP" button 2. Display cover
Stop mowing and return to the charging station (End)
1. Press the "STOP" button during operation, and then press
the button on the control panel.
► Fig.17: 1. "STOP" button 2. Display cover 3. Control panel
2.
Select the desired option.
Option Details
Stay at The Robotic Mower returns to and stays at the
charging charging station.
station
Schedule The Robotic Mower returns once to the charging
restart time station, and then restarts mowing after the set
time.
Restart on The Robotic Mower returns to the charging sta-
schedule tion, and then starts mowing at the scheduled date
and time.
3. Close the display cover.
NOTICE: When closing the display cover, press down firmly until it
clicks.
19 ENGLISH
Reference
page
20
20
20
20
21
21
21
21
22
22
23
23
23
24
24
25
25
25
26
26
26
26
26
27
27
27
27
27