Vibration
Model AH1851
h
Model AH1860
h
Model AH1875
h
NOTE:
measured in accordance with a standard test method
NOTE:
WARNING:
The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
with this power tool. Failure to follow all instructions
Save all warnings and instruc-
tions for future reference.
2
2
2
or less
2
2
2
Cordless Hedge Trimmer Safety
Warnings
-
1.
Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold mate-
rial to be cut when blades are moving. Make sure
the switch is off when clearing jammed material.
2.
Carry the hedge trimmer by the handle with
the cutter blade stopped. When transporting or
ting device cover.
3.
Hold the power tool by insulated gripping sur-
faces only, because the cutter blade may contact
hidden wiring.
"live" and could give the operator an electric shock.
4.
DANGER - Keep hands away from blade. Contact
5.
Do not use the hedge trimmer in the rain or in
wet or very damp conditions. The electric motor
is not waterproof.
6.
First-time users should have an experienced hedge
trimmer user show them how to use the trimmer.
7.
The hedge trimmer must not be used by
children or young persons under 18 years of
age.
ing training under the supervision of an expert.
8.
Use the hedge trimmer only if you are in good
physical condition.
9.
ence of alcohol, drugs or medication.
10. Work gloves of stout leather are part of the
basic equipment of the hedge trimmer and
must always be worn when working with it.
Also wear sturdy shoes with anti-skid soles.
11.
Before starting work check to make sure
that the trimmer is in good and safe working
hedge trimmer must not be used unless fully
assembled.
12. Make sure you have a secure footing before
starting operation.
13.
14. Do not operate the tool at no-load
unnecessarily.
15. Immediately switch off the motor and remove
the battery cartridge if the cutter should come
into contact with a fence or other hard object.
Check the cutter for damage, and if damaged
repair immediately.
16. Before checking the cutter, taking care of
faults, or removing material caught in the cut-
ter, always switch off the trimmer and remove
the battery cartridge.
17. Switch off the trimmer and remove the battery
cartridge before doing any maintenance work.
9 ENGLISH
-
-
-