SPORTSTECH sTread Lite Instrucciones De Montaje página 37

STEP 3
S2
S6
(B)
Connect the two connectors of the control unit.
•
• Slide the control panel B onto the two panel brackets C.
Tighten the four fixing screws S2 (hexagon socket M8x16) with their washers S6.
•
STEP 4
(D)
• Slide the two plastic covers D onto the console brackets.
Tighten the eight fixing screws S5 (Cross Recessed Truss Head Bolts M5x10).
•
Finally, tighten the eight fixing screws at the base of the two support tubes.
•
S2
S6
(C)
S5
(C)
4 x
4 x
8 x
(D)
S5
DE
EN
S2
S6
S5
37