Publicidad
Idiomas disponibles
Idiomas disponibles
Settings and Configuration Menu
To access the Settings and Configuration Menu:
Press the Button [37] or Right Knob [36] to get
access of Welding Parameters Bar.
Use the Right Knob [36] to highlight the icon
"Configuration".
Press the Right Knob [36] to confirm the selection.
Figure 35.
Table 12.
Symbol
Description
Set the Memory Limits
Set the Display Configuration
Set the Brightness Level
Lock / Unlock
Job Mode
Set the Language
Restore Factory Setting
View Software and Hardware Version
Information.
Access to the Configuration Menu
Service Menu
English
Limits
– it allows the operator to set the
limits
of
selected job. The Operator is able to adjust
the parameter value within specified limits.
Note: The Limits can be set only for the programs stored
in the user memory.
The limits can be set for:
Welding Current
Wire Feed Speed
Welding Voltage
Wave Controls
To set the range:
Enter to the Settings and Configuration Menu.
Use The Right Knob [36] to higlight the "Limits" icon.
Press the Right Knob [36] to confirm. List with
avaliable job wil be displayed on the screen.
Use the Right Knob [36] to highlight the job.
Press the Right Knob [36] to confirm selection.
24
main
welding
parameters
Figure 36.
Figure 37.
Figure 38.
in
English
Publicidad
