Publicidad
The Battery power saving feature enables a reduction in consumption of up to 50%. If it has been set, it automatically activates when the
transceiver does not receive any signal for more than 5 seconds in order to save the battery life.
The Power saving function is activated by default and can be modified only by soft-ware.
Note: Using a different battery charger other than the one specified can cause damage to your device or may even cause explosions and
personal injuries.
GETTING ACQUAINTED
1. External Speaker/Microphone Jack
4. UP key
7. Microphones
10.PTT Key
13. DCS enabled
16. Keypad lock enabled
19. Transmit power indicator
2. PTT key
5. Led indicator: RED: TX; GREEN: RX.
8.Monitor key
11. Battery level indicator
14. VOX enabled
17. Transmit Status
20.LED Flashlight
4
3. Antenna
6. DOWN key
9.LAMP key
12. CTCSS enabled
15. Channel (1-16)
18. Receive Status
Publicidad
