Publicidad
Idiomas disponibles
Idiomas disponibles
◾
Do not fell trees near electrical wires or buildings.
◾
Cut only when visibility and light are adequate for you to see clearly.
Proper Grip on Handles
◾
Wear non-slip gloves for maximum
grip and protection.
◾
With the saw on a firm, flat surface,
hold the saw firmly with both hands.
◾
Always grasp the front handle with
the left hand and the rear handle
with the right hand.
◾
The fingers should encircle the
handle, with the thumb wrapped
under the front handle (Fig. 20a).
WARNING:
handed (cross-handed) grip, or any stance
which would place your body or arm
across the chain line.
WARNING:
trigger switch with your left hand and
hold the front handle with your right hand.
Never allow any part of your body to be in the chain line while operating a chain saw
(Fig. 20b).
Proper Cutting Stance (Fig. 21)
◾
Both feet should be on solid ground,
with weight evenly spread between
them.
◾
The left arm should be straight,
with the elbow locked. This helps to
withstand the forces generated by
kickback.
◾
Your body should always be to the
left of the chain line.
36
56-VOLT CORDLESS COMMERCIAL 20" CHAIN SAW — CSX5000/CSX5000-FC
Never use a left-
Do not operate the
20a
20b
21
Chain Line
Grip with thumb
below handle
Chain Line
Straight Arm
Position
Publicidad
