Publicidad
Idiomas disponibles
Idiomas disponibles
◾
Wear inside the bar rails which
permits the chain to lay over
sideways.
◾
Bent guide bar.
◾
Cracked or broken rails.
◾
Spread rails.
The guide bar has a sprocket at its tip. The
sprocket must be lubricated weekly with a
grease syringe to extend the guide bar life
(Fig. 43 & 44). Turn the nose sprocket while
pumping grease into the lubricating hole
until the entire sprocket has new grease.
Do not push dirt into the hole.
TRANSPORTING AND STORING
◾
Do not store or transport the chain
saw when it is running. Always
remove the battery pack before
storing or transporting.
◾
Always place the guide bar sheath
on the guide bar and chain before
storing or transporting the chain
saw. Use caution to avoid the sharp
teeth of the chain.
◾
Clean the chain saw thoroughly
before storing. Store the chain saw
indoors, in a dry place that is locked
and/or inaccessible to children.
◾
Keep away from corrosive agents
such as garden chemicals and de-
icing salts.
48
56-VOLT CORDLESS COMMERCIAL 20" CHAIN SAW — CSX5000/CSX5000-FC
42
Bar Rails
Lubricating Hole
43
44
Sprocket in
Guide Bar Tip
Lubricating Hole
Publicidad
