Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
PROBLEM
Motor does not
run.
56-VOLT CORDLESS COMMERCIAL 20" CHAIN SAW — CSX5000/CSX5000-FC
CAUSE
◾
The battery pack is
not attached to the
chain saw.
◾
No electrical contact
between the saw and
battery pack.
◾
If the fuel-gauge
circle on the LCD
screen is flashing, the
battery pack charge
is depleted.
◾
If the high-
temperature indicator
appears on the
LCD screen, the
battery pack or chain
saw is too hot.
◾
If the chain brake
icon
appears on
the LCD screen, chain
brake is engaged.
◾
Saw chain is bound
in the wood.
◾
Debris in bar groove.
◾
Debris in side cover.
SOLUTION
◾
Attach the battery pack to the chain
saw.
◾
Remove battery pack, check contacts
and reinstall the battery pack.
◾
Charge the battery pack.
◾
Allow the battery pack or chain saw
to cool until the temperature drops
to the recommended operating
temperature range.
◾
Pull the chain kickback brake paddle
backward toward the front handle (to
the operating position).
◾
Release the trigger switch; remove
the saw chain and guide bar from the
wood, then restart the chain saw.
◾
Press the saw chain against the
wood, move the chain saw back and
forth to discharge the debris.
◾
Remove battery pack, then remove
side cover and clean out debris.
49
Publicidad
