Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO CLEAN
- Always unplug the air puri er before cleaning.
- Do not use detergents that contain organic solvents (solvent, thinner, etc), bleach,
Tips
- Do not put the air puri er in water or spray water directly on it.
Cleaning the Air Quality sensor (every 2 months)
1. Use a soft brush or vacuum cleaner to clean the air quality sensor's air
inlet and outlet.
2. Open the air quality sensor cover on the right-hand side of the product.
Wipe the lens, dust inlet, and dust outlet with a dry cotton swab.
* Without regular cleaning, the performance of the air quality sensor deteriorates.
* The cleaning cycle differs depending on the operating environment. When using the product in a dusty
environment, clean the sensor more often.
How to Clean Front Cover
Use a soft cloth or brush to wipe off the dust on the surface of the
front cover.
* Use a slightly wet cloth to wipe when contamination is high
(Do not use abrasive).
How to Clean Main Body of Product
Use a dry and soft cloth to wipe it.
* Use a slightly wet cloth to wipe when contamination is high
(Do not use abrasive).
15
chlorine, or abrasives.
Air outlet
Air inlet
Dust outlet
Dust inlet
Publicidad
