Dreame VTT1 Manual De Usuario página 16

How to Use
EN
Working Methods
Select rom two working methods or the vacuum, which can be selected based on your
own needs.
When the vacuum is running, it will monitor the amount o inhaled dust within 1 second.
The amount o dust will be displayed by the color o dust level monitoring curve on the
screen in real time.
Method 1: Discontinuous Cleaning Mode
Press and hold the switch o the vacuum to enable this mode, and release it to stop
immediately.
Method 2: Continuous Cleaning Mode (Electronic Lock)
Click the electronic lock key to switch to Continuous Cleaning Mode, and then briely
press the on/o switch to keep the vacuum in Continuous Cleaning Mode.
Use the electronic lock to ree your ingers rom atigue caused by holding the switch.
Note:
• In this mode, briely press the on/o switch to suspend the operation or start again and
the working mode o the vacuum will not change.
• Click the electronic lock again to quit Continuous Cleaning Mode.
12