Dreame VTT1 Manual De Usuario página 20

Care & Maintenance
EN
3. Remove the pre-ilter irst, then lit the handle o the cyclone assembly and turn it
counterclockwise until it stops, then pull to lit out the cyclone assembly.
4. Wipe the dust cup with a sot wet cloth. Pay attention to wring out the dishcloth beore
using.
5. Rinse the cyclone assembly and pre-ilter until they are clean. Ater washing, air dry or
at least 24 hours .
Note: It is recommended to clean the pre-ilter at least once every 3 months and the
cyclone system at least once every 6 months.
16
1
Cyclone Assembly
2
3
To reduce the risk
o electric shock, do
not rinse the dust
cup with water.
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6
Pre-Filter