Dreame VTT1 Manual De Usuario página 24

Care & Maintenance
EN
Cleaning the Smart Multi-Brush Bar
1. Turn the lock counterclockwise until it
stops, then remove the roller brush rom
the smart multi-brush bar.
3. When it is dirty, rinse the roller brush
with clean water until it is clean.
20
2. Use scissor to cut o the hairs and
ibers that get stuck on the brush bar
head. Wipe the dust rom the notch and
transparent cover with a dry cloth or
paper towel. Thoroughly dry beore use.
4. Stand the roller brush upright or at
least 24 hours until it is ully dry.
12
11 1
10 2
24 hrs
9 3
 4
 
