John Bean B600 Manual De Operador página 76

76
5-36
26
5-37
26
5-38
5-39
5-40
Operation
Fig. 5-36 Optimization "OP.2"
START is signalled on the screen.
 Spinn the wheel.
A compensation run is performed.
The screen "OP.3" as shown in Fig. 5-37 is displayed.
Fig. 5-37 Optimization "OP.3"
 Mount the tire correctly on the rim and inflate
to specified inflation pressure (make sure the
mounting guide rim of the tire is correctly seated).
 Confirm by pressing menu key 26.
The Optimization "OP.4" screen (Fig. 5-38) is displayed.
Fig. 5-38 Optimization "OP.4"
(first measuring run of tire/rim assembly)
 Clamp the wheel on the balancer.
 Readjust the wheel such that the valve is exactly
perpendicular to and above the main shaft.
 Enter the valve position by pressing menu key 26.
The Optimization "OP.5" screen (Fig. 5-39) is displayed.
Fig. 5-39 Optimization "OP.5"
START is signalled on the screen.
 Perform the measuring run.
A measuring run is performed.
The Optimization "OP.6" screen (Fig. 5-40) is
displayed.