John Bean B600 Manual De Operador página 90

90
26
5-60
29
5-61
26
5-62
26
5-63
5-64
Operation
Fig. 5-60 Minimization "Un.10", outside
 Rotate the wheel into marking position following the
arrows.
 In this position provide a double mark on the tire
outer side exactly perpendicular to and above the
main shaft.
 Confirm by pressing menu key 26.
The Minimization "Un.11" screen (Fig. 5-62) is
displayed.
Fig. 5-61 Minimization "Un.10", inside
If the tire cannot be turned over on the rim (e.g.:
Asymmetrical and Directional),
press menu key 29, then


continue as shown on screen Minimization
"Un.10" (Fig. 5-60).
If the wheel can be turned over on the rim;
 Rotate the wheel into marking position following the
arrows.
 In this position provide a double mark on the tire,
on the inside of the wheel, exactly above the main
shaft.
 Turn over the tire on the rim (tire changer).
 Confirm by pressing menu key 26.
The Minimization "Un.11" screen (Fig. 5-62) is
displayed.
Fig. 5-62 Minimization "Un.11"
 Readjust the tire on the rim such that the double
mark coincides with the valve (use tire changer).
 Confirm by pressing menu key 26.
The Minimization "Un.12" screen (Fig. 5-63) is
displayed.