cecotec COOLMARKET COMBI 322 INOX E Manual De Instrucciones página 64

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Temperature indicator and LED light
2. Refrigerator compartment shelves
3. Crisper box cover
4. Crisper box/Humidity box
5. Freezer-compartment drawers
6. Adjustable feet
7. Door shelves/bottle holder
Note:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Levelling
- Make sure you level your refrigerator with the front levelling feet. If it is not levelled, the
refrigerator performance will be affected, or it can even cause a malfunction.
- After installing the refrigerator, wait 4 hours before using it to allow the refrigerant to
stabilise.
3. INSTALLATION
Place of installation
Ventilation condition
- The location you choose for the installation of the refrigerator must be properly ventilated
and away from heat sources. Do not place the refrigerator near heat sources, like a
64