cecotec COOLMARKET COMBI 322 INOX E Manual De Instrucciones página 71

Temperature setting
Recommended
Ambient
mode setting on the
display panel
Over 35ºC Level 3
16ºC-35ºC Level 3
Under Level 3
16ºC
- When ambient temperature around the refrigerator is over 35ºC, do not set the thermostat
to Mode 5 and set the air regulator to the leftmost position, so as not to affect the normal
cooling process of the refrigerator.
- Do not set the thermostat to mode 5 and set the air regulator to the rightmost position, to
prevent the refrigerator compartment from cooling down below normal.
- If the refrigerator temperature is not cold or is low, set the thermostat to the medium
mode and the air regulator to the middle position. In case the Fast Cool function is active,
set the air regulator to the middle position.
Fast Cool
- The Fast Cool function is useful to avoid losing food nutrients and preserve its freshness.
- After a cumulative operating period of 30 hours, the Fast Cool function will be automatically
deactivated, and the temperature mode will be reset to the one set before activating the
Fast Cool function.
Function memory after a power failure
In the event of a power failure, the refrigerator will save the functions set before the power
failure and will activate them when the power is restored.
Delayed start after power failure
To prevent damage to the refrigerator compressor in the event of a short power failure (i.e.,
less than 5 minutes), the compressor will not start immediately after switching on.
Recommended air
regulator position
Fig. 4.1
Fig. 4.2
Fig. 4.3
BOLERO COOLMARKET COMBI 322 WHITE E / INOX E / DARK E
Notes
1) It is recommended to set
medium mode.
2) The temperature modes can
be adjusted as recommended
in the table on the left in case
ambient temperature around the
refrigerator changes.
ENGLISH
71