Pioneer PDP-508XG Manual De Instrucciones página 15

Preparation
Chapter 5
Preparation
Installing the plasma television
Over
10 cm
Location
• Avoid direct sunlight. Maintain adequate ventilation.
Caution
• If you do not leave sufficient space above the plasma television,
it will not receive enough ventilation and will not operate
properly.
• Pioneer will not be responsible for accident or damage caused
by inadequate installation or stabilization, erroneous
operation, remodeling or natural disasters.
Note
• Allow enough space around the upper and back parts when
installing to ensure adequate ventilation of the rear of the unit.
• Be sure to install the plasma television in a flat, stable location.
Using the optional Pioneer stand
For details on installation, refer to the instruction manual supplied
with the stand.
Using the optional Pioneer speakers (for PDP-508XG
only)
For details on installation, refer to the instruction manual supplied
with the speaker.
Moving the plasma television
When installing on a rack, etc., hold the plasma television as
shown on the right. Because the plasma television is heavy, be
sure to have someone help you when moving it.
Over 50 cm
(For PDP-508XG)
Under speaker
Side speaker
(For PDP-428XG)
Note
• Do not use the speaker to support the weight of the plasma
television.
• When the plasma television has under-mounted speakers,
always remove the speakers before moving the plasma
television. Do not hold the plasma television by the speaker
mounting fittings.
05
15
En