Transport, Storage And Handling; Machine Transport Conditions; Ambient Conditions For Machine Storage; Handling - Nussbaum WA 780 Manual De Instrucciones

These instructions are for the attention of
persons with basic mechanical skills. YES
We have therefore
descriptions of
omitting detailed instructions regarding,
for example, how to loosen or tighten
the fixing devices on the machine, etc.
Do not attempt to perform operations
unless properly qualified and with
suitable experience. If necessary, please
contact an authorised Service Centre for
assistance.
NOTE
All the installation operations must be
carried out by Technical Service person-
nel authorised by the Manufacturer.
TRANSPORT,
STORAGE AND HANDLING

MACHINE TRANSPORT CONDITIONS

The aligner must be shipped in its origi-
nal packaging and stowed in the position
indicated on the outside.
The basic packaging of the aligner con-
sists of two items:
- the central unit in a cardboard box on
a pallet.
- the accessories (including the measuring
sensors) in a wooden crate on a separate
pallet.
• Packaging data:
Central unit
(Box on pallet)
Dimensions
116x76x140
(cm)
Weight (Kg)
64
condensed
each operation
Supply kit
(Wooden
crate)
154x92x113
90 90
AMBIENT CONDITIONS FOR
MACHINE STORAGE
the
• Relative humidity: 20% ÷ 80%
by
• Temperature range: -10° - +60°C.
Do not stack other items on top of the
packing or damage may result.
To move the packaging, insert the tines of
a forklift truck into the slots on the base
of the packaging itself (pallet) (fig. 1).
To move the machine, use the wheels
of the aligner; to lift it, insert the forklift
tines under the lower platform of the
wheeled cabinet, keeping it near the
wheels of the aligner.
Always use suitable hoisting belts or ap-
proved ropes.
User Manual WA 780 - Cura S 780
WARNING

HANDLING

CAUTION
1