CARE AND MAINTENANCE
Failure to care for and maintain your product may result in the risk of serious injury.
Clean the rollator regularly with warm water and a soft cloth. Do not use abrasive products or detergents.
- Dry with a clean, dry soft cloth.
- Ensure that there is no build up of dirt or debris around the axle, brakes or wheels.
- Do not use cleaning products containing phenol or chlorine and all solvent-based products, as this may damage aluminium and
polyamide materials.
- Lubricate the wheels with a little oil if they squeak.
- Regularly check that all screws are properly fixed and tightened.
- Check that the brakes are working properly before each use.
- Check the parking brakes by locking the rollator in parking mode and trying to move the rollator forward.
- If a malfunction occurs, do not repair the rollator yourself. Consult an authorised dealer.
•
Checklist :
To keep the rollator in good condition, check before each use, and check regularly as follows
Check the item
Clip and knob for height adjustment
Structural weld at wheels
Cleanliness
Screws and fasteners
Stability of frame and backrest
Condition of seat
Condition of the wheels and pads
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring your
product, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must be inspected
by an authorised specialist.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish to carry out
recycling for yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to observe the storage conditions can lead to deterioration of the product and thus to the risk of serious injury.
Do not store your rollator for extended periods of time near a source of heat or sunlight (e.g. behind a window or near a radiator or in
a car) or near a source of cold.
Keep away from open flames and sparks.
Respect the conditions for storing your rollators.
- In a dry and temperate place
- Protect your rollator by wrapping it from dust, corrosion (e.g. abrasive elements, sand, sea water, salty air)
- Store all removed parts together, in the same place (or mark them if necessary) to avoid mixing them with other products during
reassembly.
- All components should be stored without any load (do not place heavy objects on the rollator parts, do not jam anything).
PERIOD OF USE
The life expectancy of this product is 2 years under normal use, safety and maintenance conditions. Beyond this period, the product
can be used for as long as it is still in good condition.
DMI-F-12_Annexe 2_Notice.3
Anytime
Weekly
X
X
X
X
Monthly
Yearly
X
X
X
8